Debut album released on DIY audio player

For my bachelor-degree project I decided to pile together various recordings and compostions collected during the past years I've been under my alias Dögenigt and make an album.

For a long time I'd been thinking of an alternative to the digital release or vinyl and what have you and I discovered a tiny circuit based on a miniature arduino-like chip (ATtiny85) which can be programmed to read lossless quality sound files from an SD-card and play them (in 44.1 kHz 16 bit) via the PWM pins.
So I decided to go ahead and build the circuit into a small audio player to be built into some casing as my album and have the project and journal revolve around that.

I've been working on the project for the past couple of weeks - it's all in the papers I wrote.
Link to the paper in danish: http://data.xn--dgenigt-q1a.dk/DIEM/opgaver/BA3-Bachelorprojekt.pdf
I tried to translate into english but failed to do so. Let me know if you have success!

Images from the project:

Wave-player based on ChaN's circuit and code:
Runs of 3.3V and outputs sound directly to jack output in 44.1 kHz 16-bit sound. So far, only mono as more digital pins are needed. The PWM-outputs on the ATtiny85 each create an 8-bit signal, when 2 are added together they make 16-bit. For stereo 16-bit sound 4 digital pins are needed. We didn't have enough time to do this but I know of a guy who did it with an ATmega328.

    Finalized player with batterypack, speaker and SD-card.

 

    Simple version of the player with no jack output but screw terminals instead for power and output.

    Player cased inside VHS-cassette :-)

    ChaN's (simple!) circuit

The album is already online on my bandcamp as digital download but in the future I will have the release available on this platform as in the pictures above. The whole album can be bought for $10 and of course streamed for free. All the tracks are made with my homemade gear. Enjoy!

Dögenigt @ Mayhem: Noise Convention #1, 18/10/2014

I just received this footage from the Noise Convention last year on Mayhem, Copenhagen. The video is not very long but there's audio recording from the mixer of the full concert if anyone's interested.

Aristoteles Logic Synth Update #4: Logic Gates

I thought it was time for building the next module for dear Aristoteles, my 'lo-fi logic synth project' so I did the logic gate module which consists of 8 AND gates with 2 inputs and an LED for the output. The truth table on the right describes how the gate will behave: the output only goes high (1) when both inputs are high. The result is a very simple form of amplitude modulation, or it can be used to control the path of signals from the other modules with counters or LFO's, you name it.  The video below speaks for itself.

In the video I demonstrate the effect of the 3 different frequency ranges on the oscillators: LFO range signals are good for 'letting through' audio range signals at a certain rate for "beep beep beep beep" sounds. 2 audio range signals will generate complex pulsating modulations and beatings when adjusting the pulse width.
Setting the range to the high pitched setting on both oscillators will generate classic vintage radio-like modulation squeeks. I also tried using the 'octave divider module' for one of the inputs which has its own unique sound.

I chose to have all the logic gates as AND gates. For a long time I was in doubt about wether to have a pair of XOR or NAND gates just for the hell of it but I could not find a good reason as they don't do much sound-wise where as the AND gate is so clear in its function and I want to be able to make complex signal paths with counters, dividers, random clocks and all eight oscs - all controlling each other through the gates. 

I am already starting on the 10-step counter 'cause I cannot wait to have each step 'open' a unique oscillator with different frequencies!

The circuit is very simple, I basically just wired the in- and outputs straight to the 4081 but attached 100K resistors on each pin to prevent static electricity from the end of the wires going into the chip when patching.
LED's are controlled by transistors as always to prevent voltage dropping on the outputs.

UPDATE:
I had my brother a.k.a. SNU over and he fell in love with the new module which resulted in hours of wiggling.
Here's a a little peak of the tweak :-)

Terrestrial Signals III Live concert @ DIEM Elektro 'Pulse'

A late happy solstice to all of ye - I have been ind bed for most of the holidays, guess my body and mind was in need for some rest, it's hard work wanting to do you own thing and the following concert you are about to witness required a lot of planning and soldering.
I found out I was booked to play at the next of DIEM's obligatory student concerts 'DIEM Elektro' - this specific concert was called 'Pulse' so I prepared some pulsating light-controlled rhytms with a hacked monotron, using only the nice korg filter with a photoresistor, clock-synced to the notorious MicroWaveSampler by my Clock Box. I included my electromagnetic plasma ball synth described in the post below. I was pretty content with the outcome although some of my gear failed a bit, including my little TV-to-sound device. To much noise on the line to gain it. Anyways, please check out the video - it was shot by my brother Alec Sander and with his GoPro Hero camera attached to my head so you get the P.O.V. close up shots from my perspective. Enjoy!

I have a line of projects planned for this year, as I am writing my bachelor project which I think will focus on alternative media for releasing album material, more to come on that. After the last concert I finally chose to sucumb to the idea of a modular system instead of all these seperate modules which has to be wired together on set, it's too much hazzle every time I need to set up for a concert so now I will jump into building a complete modular system with the same principles used so far: analog means of sampling, tape delays and quirky little circuits. Stay tuned!

Lot of love, Dogenigt

Compositions on Bandcamp

Hi lovely people! Hope you're enjoying your summer.
I've created a bandcamp store where you can get some of my releases in lossless format.
Some of the compositions might appear on a future debut album, which I intend to release online and on a physical medium which will be quite different from your typical CD/LP format.

Link to my bandcamp is found by clicking on 'Releases' in the top menu.

The latest track I've finished is called Plate Phonetics and consists of recordings of cuts and scratches on blank phono records which gives weird rhytmic patterns. On top of it I've added some tones with feedback oscillator (Derek Holzer's soundbox) and recording of my homemade string instrument.




The other tracks available so far, you might've heard on my soundcloud. They are 'Subtlle Visit' composed during a meditation and creativity workshop with Kim Cascone and 'Veins of The Robot' composed with Christina Kubisch during a workshop with her on DIEM where we brought her electromagnetic headphones in the city of Aarhus.
'Entraining Patterns' is made solely from homemade equipment: the wavetable synth, Vibrati Punk Console and passive ring mod. There's also a composition made with The MicroWaveSampler.

See you in 2014!

Dear readers, thank you so much for showing interest in my projects - I can't wait to show off all the coming projects I've got up my sleeve for you! Here's a snapshot of my largest project so far: ARISTOTELES! It's going to be a "logic" modular synth. I couldn't wait any longer with revealing it, I've just attached all the knobs and jacks to the box - stay tuned, happy new year and see you in 2014! best wishes, Dögenigt.